A: Yes. An existing fireplace and chimney is a convenient site for a new stove. To make this installation easier, Vermont Castings wood stoves have a reversible flue collar, so the stovepipe can extend straight out the back. Also, certain stove models have optional short legs to enable the stove to fit into the fireplace. If installing a stove into an existing fireplace and chimney, keep these points in mind: One, the size of the existing fireplace chimney needs to meet the criteria of the selected stove (check the Owner’s Manual). Two, the venting from the stove must extend past the damper into the chimney. Flexible metal connectors are available for this. Three, check to see that any wooden mantel is within clearances. And four, have your dealer or a professional chimney sweep inspect the chimney. A chimney liner may be needed for optimal safety and performance. An alternative to passing the pipe through the flue damper is to use a thimble sleeve that passes through the wall, connecting the single wall chimney connector to the masonry chimney.

Designed by Valtech Web Design